Super Street Fire : Turbo Championship Edition

Another fire arts collaboration by Site 3.

100
%
Funded
$2,454
received
on a goal of
$2,451
Funded on the 07/01/2011
39 supporters

project season over -- shwag going out soon!

Posted by shardy on Oct. 4, 2011, 5 p.m.

This news is reserved for project supporters. You know what you need to do!

Add your comment

No comments yet

Contribute, Receive
This fundraising is finished
2
For $1 or more

You get a high five! Yeah!

Every little bit helps.

4
For $10 or more

$10 gets us smaller electronics components: a battery for the glove electronics, a control board for the XBee radios we use everywhere, the MOSFETs we use for the fire control system.

$10 gets you some SUPER STREET FIRE stickers, that you can... well, stick to stuff.

15
For $25 or more

$25 gets us an XBee radio, which we use to communicate with all of the system components. Nobody likes wires, especially when they're connected to gloves you have to wear and punch with! We're going to need at least 10 radios, and likely even more to test with and have as backups.

$25 gets you a custom SUPER STREET FIRE patch which you can iron or sew on to a bag, jacket, sash, or whatever the cool kids do with patches these days.

5
For $50 or more

$50 gets us a liquid tank, a pump, a nozzle, and some hose. The tank is filled with a liquid solution of a metal salt, and sprayed into the fire whenever a flame effect goes off. The end result is colored fire! We need 32 of these, two for each of the 16 flame effects.

$50 gets you a t-shirt with the Site 3 fire logo on it. Awesome and stylish at the same time! You also get a patch. And a high five. YEAH!

3
For $99 or more

$100 gets us a flame effect control board, and all the parts we need to get it talking to our control system. We need three of these: one for the flame effects themselves, and one for each flame color.

$100 gets you your very own wifire 16 board: an Arduino-compatible, wireless, 16-channel solid state relay controller. Use it to control your own flame effects, motors, or anything else where you need to switch out power to devices. We'll also throw in a t-shirt or a patch along with the board.

1
For $197 or more

$200 gets us an IMU (inertial measurement unit) used in the gloves, and all supporting hardware. It hopefully also covers the cost of the glove itself. We need four of these, and maybe more for testing and backup.

$200 gets you a wifire 16 kit, all parts included. Control your own flame effects, LED lighting, anything else that runs on DC power...

0
For $491 or more

$500 gets us a lot of stuff.

$500 also gets you a lot of stuff: we'll give you one of everything we're offering as rewards, as well as give you dedicated free play time with fire in the ring. We'll also put your head on one of the characters in the simulator, to forever immortalize you. If you're into that sort of thing.

I do not want any reward
shardy
Creator
shardy
Seth Hardy
Toronto, Canada
Early Birds
    • Someone from Toronto, CA
    • Someone from London, CA
    • Someone from Toronto, CA
    • Someone from Toronto, CA
    • Someone from MontrĂ©al, CA
    • Someone from Seattle, US
    • Someone from Toronto, CA
    • Someone from Toronto, CA
    • Someone from Toronto, CA
    • Someone from Brooklyn, US
    • curgoth
    • Someone from Toronto, CA
    • Someone from Mississauga, CA
    • Someone from Winooski, US
    • Someone from Toronto, CA
    • Someone from keswick, CA
    Official Users ♥ it !
    • barredevie
    • upian
    • spintank